Changsha Zoomlian Pump Co., Ltd. 长沙中联泵业股份有限公司

language
    language
    Products
    Professionalism forges quality, innovation creates value.
    Fluorine-coated alloy axial pump JXF for high temperature
    Fluorine-coated alloy axial pump JXF for high temperature
    +
    • Fluorine-coated alloy axial pump JXF for high temperature
    • Fluorine-coated alloy axial pump JXF for high temperature

    Category:

    Axial Flow Pump

    Keywords:

    Pump

    Axial flow pump

    Axial flow water pump

    Share on

    Fluorine-coated alloy axial pump JXF for high temperature

    Flow: 300-8500m³/h

    Lift head: 3-5.3m

    Power: 7.5-185kw

    Rotation speed: 380-980r/min

    Shaft power: 3.5-111.77kw

    Price: 18500-212000

     

    The fluorine-lined axial pump type JXF is a new pump manufactured through the improvement and processing of dozens of processes, based on the composite steel-lined pump that our company has accumulated rich experience with and that has been used for a long time in the residual acid concentration stage of titanium dioxide.

    +86 0731-88192288

    Customer service hotline

    info@cipump.com

    Email

    Recommended
    Online Inquiry
    Product Description Product Specifications Why Choose Us? FAQ

    Product Description

    The JXF fluorine-lined alloy axial pump for high temperature is a new pump manufactured through the improvement and processing of dozens of steps, based on the composite pump with steel lining that has been used for a long time in the residual acid concentration stage of titanium dioxide. Compared to conventional axial pumps, it has significantly improved corrosion resistance, wear resistance, high temperature resistance, leak prevention, and efficiency. Currently, the industry where it is most widely applied is the residual acid concentration treatment in the titanium dioxide industry, with good results. This pump features high efficiency and good cavitation resistance performance. Under conditions where titanium alloys cannot last long, it can operate for several years.

    JXF Fluorine-Lined Alloy Axial Pump for High Temperature

    Product parameters

    Features of the high-temperature fluorine-coated alloy axial pump type JXF

     

    Features of the high-temperature axial pump type JXF

    1. High corrosion resistance

    　　The flow passage part of the high-temperature axial pump type JXF is completely made of high-quality PFA material, with great adaptability to corrosive liquids such as nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid, and strong oxidizing agents. The more corrosive the liquid, the more its excellent properties stand out. Its corrosion resistance far exceeds that of high-nickel alloy, type 20 alloy, and much more so high-silicon cast iron, enjoying worldwide reputation as the king of corrosion resistance.

    2. Excellent wear resistance

    The high-temperature axial pump type JXF is manufactured through a special melting and molding process. The pump casing with steel lining has a fluorine thickness of more than 10 mm, while the pump with a clamping plate has a fluorine thickness of more than 25 mm, with a special treatment on the inner fluorine wall that makes it internationally leading in resistance to ferrous sulfate abrasion.

    3. Excellent high-temperature resistance

    The fluorine-coated axial pump type JXF has excellent properties of resistance to sudden thermal changes, self-lubrication, and impact resistance. Therefore, key fluorine parts such as the impeller do not crack from impacts, overcoming the deficiencies of ceramic and high-silicon cast iron pumps which are brittle. Thanks to its excellent overall performance and stable operation, it can be safely used long-term in harsh environments from -30°C to 150°C. (The residual acid concentration treatment has a maximum temperature of 130°C, while the melting point of the fluorine material is 360°C).

    4. Easy disassembly and maintenance

    Because the impeller, pump cover, and shaft sleeve are made entirely of fluorine material, the pump's own weight is considerably reduced, allowing easy removal of the rotor part from the pump body, facilitating disassembly and assembly. This avoids the problems of silicon iron pumps that require careful repairs for fear of breaking or operational limitations.

    Structural features of the high-temperature fluorine-coated alloy axial pump type JXF

     

    Structural diagram of the fluorine-coated axial pump type JXF

    1. This series of pumps has a cantilever structure, with horizontal installation and can use pulley transmission according to user needs to adjust flow and head. The pump is designed according to the required parameters for axial pumps, optimizing fluid flow conditions.

    2. The pump uses a removable rear door structure, facilitating disassembly and maintenance without needing to dismantle the connecting pipes, allowing extraction of the pump shaft.

    3. The shaft seal uses a new combined seal, with a double-end mechanical seal; the static ring is Sie and the dynamic ring is made of imported Hastelloy alloy material, requiring cooling water washing. It can also use an external single-face mechanical seal, suitable for transporting highly corrosive liquids with suspended particles.

    4. The pump body flow channel is not easily blocked, has a large margin against cavitation, and the design of the shaft and bearings is reliable to ensure stable operation, low vibration, low noise, and long service life.

    5. The pump rotation direction is indicated with an arrow on the bearing support.

    Installation of the high-temperature fluorine-coated alloy axial pump type JXF

    1. Before installation, the size, position, and surface condition of the base must be checked, and it must be confirmed that the elevation meets design requirements.

    2. After washing and pouring concrete into the anchor bolt holes, it must solidify for at least 48 hours and then the pump's horizontality and verticality must be rechecked.

    3. The pump and motor must be installed on the same shaft line, with a deviation no greater than 0.2 mm.

    4. The pump's connecting pipes must have reasonably installed supports to prevent the pump from bearing the equipment's weight.

     

    Friendly tip: For more performance parameters of the high-temperature fluorine-coated alloy axial pump type JXF, click → 【Pump selection】 Consult on the page

    Changsha Zhonglian Pump Industry Co., Ltd.

    Why Choose Us?

    Changsha Zhonglian Pump Industry Co., Ltd. was established in 1989, following the reform of the Changsha Water Pump Factory. It is a national high-tech comprehensive enterprise integrating design, research and development, manufacturing, and service. The company was listed on the Hunan Provincial Stock Exchange on December 31, 2019, with the abbreviated name "Zhonglian Pump Industry" and stock code: 600275HN. It is currently a key enterprise in China's centrifugal pump industry and one of the leading domestic manufacturers of multi-stage pumps, headquartered in Changsha, Hunan, a historical and cultural city in China.

    Changsha Zhonglian Pump Industry Co., Ltd.
    Changsha Zhonglian Pump Industry Co., Ltd.

    FAQ

    Q

    What products do you mainly produce?

    A

    Zoomlion Pump Industry manufactures various large industrial centrifugal pumps. The main products include: self-balancing multistage pumps, multistage centrifugal pumps, single-stage centrifugal pumps, split-case pumps, chemical pumps, submersible pumps, pipeline pumps, long-shaft pumps, condenser pumps, and more.

    Q

    Can you help me choose a model?

    A

    Of course! If the water pump model is not selected accurately, it can cause significant problems. After you take it back, it might be either too small to meet the usage requirements or too large, resulting in higher electricity and fuel costs, increasing the operating expenses.

    Q

    Why is the price quotation so slow?

    A

    Because centrifugal pumps are non-standard custom products with many models and a wide price range. Even for the same model, the price varies greatly depending on the materials and configurations used. Taking the most common pump accessory—the impeller—as an example, the price of a stainless steel impeller is several times that of a cast iron impeller. Therefore, we need to clearly confirm the relevant information to provide you with an accurate price. Normally, if you provide comprehensive information, we can quote within 5 minutes.

    Q

    What information should I provide when I need a quote?

    A

    Usually, if you want to get an accurate quote, it is recommended that you provide us with the following information: pump flow rate, head, on-site operating voltage, frequency, temperature of the conveyed liquid, pH value, solid particle content, on-site installation conditions (horizontal or vertical installation), and other related details. If you are not very familiar with these, it’s okay; our sales manager will assist you in determining them.

    Q

    Do you have centrifugal pumps in stock?

    A

    There are many models and configurations of centrifugal pumps. Except for a small number of commonly used standard models that are in stock, the vast majority of models and configurations are not stocked and are customized products. We need to first select the pump based on your site conditions such as flow rate, head, medium temperature, pH value, and installation conditions. After determining the pump model and configuration, we can then place an order with the workshop for production.

    Q

    What is your usual delivery time?

    A

    Models in stock can be shipped by the next day at the latest. Others are custom-made, and depending on the product size and specific project conditions, the delivery time is generally between 7-90 days. Please consult our sales manager for details: 0731-88632200 。

    Online Inquiry

    Attention: Please leave your contact information, our professional staff will contact you as soon as possible!

    Inquire Now