Changsha Zoomlian Pump Co., Ltd. 长沙中联泵业股份有限公司

language
    language
    Products
    Professionalism forges quality, innovation creates value.
    Single-stage oil pump with horizontal IY-type suction
    Single-stage oil pump with horizontal IY-type suction
    Single-stage oil pump with horizontal IY-type suction
    Single-stage oil pump with horizontal IY-type suction
    +
    • Single-stage oil pump with horizontal IY-type suction
    • Single-stage oil pump with horizontal IY-type suction
    • Single-stage oil pump with horizontal IY-type suction
    • Single-stage oil pump with horizontal IY-type suction

    Category:

    Oil Pump

    Keywords:

    Pump

    Share on

    Single-stage oil pump with horizontal IY-type suction

    Flow: 3.75-1080m³/h

    Lifting height: 4-128m

    Power: 0.55-160kw

    Efficiency: 23%-85%

    Pump weight: 40-2100kg

    NPSH (Net Positive Suction Head): 2.0-6.0m

    Price: 0.31-3.15 ten thousand

     

    Suitable for transporting petroleum products without solid particles, with a transported medium temperature between -20℃ and +150℃, the pump's maximum working pressure does not exceed 1.6MPa, and the suction inlet pressure does not exceed 0.8MPa, mainly used in oil fields, refineries, and the petrochemical industry.

    +86 0731-88192288

    Customer service hotline

    info@cipump.com

    Email

    Recommended
    Online Inquiry
    Product Description Product Specifications Why Choose Us? FAQ

    Product description

    　　Single-stage centrifugal pump with simple suction type IY horizontal Oil pump Suitable for transporting petroleum products without solid particles, with a transported medium temperature between -20℃ and +150℃, the maximum working pressure of the pump does not exceed 1.6MPa, and the suction inlet pressure does not exceed 0.8MPa, mainly used in oil fields, refineries, and petrochemical industry. 

    Product parameters

    Parameter range and explanation of the IY type horizontal single suction monoblock centrifugal pump model:

    　　Flow rate Q 3.75~1080m3/h

    　　Manometric height H 4~128m

    　　Model explanation: IY80-50J-200

    　　IY type single suction monoblock centrifugal pump for oil transportation

    　　80- Inlet diameter (mm)

    　　50- Outlet diameter (mm)

    　　J- Indicates use at reduced speed

    　　200- Nominal impeller diameter (mm)

    Meaning of the IY type oil pump model

    Explanation of the structure of the IY type horizontal single suction monoblock centrifugal pump:

    Structural diagram of the IY type monoblock centrifugal oil pump

    　　The main parts of the IY type monoblock centrifugal pump include the pump body, impeller, pump cover, support components, mechanical seal, and shaft.

    　　The IY type oil pump series has a rear door structure, whose advantage is that repair or replacement of rotor parts does not require disassembling the pipes; the rotor parts are supported by the support (see the IY pump structural diagram).

    　　Axial shaft force balance: in pumps with large axial force, the impeller has balance holes, and the remaining axial force is supported by the bearings.

    　　The shaft seal type uses a single-face unbalanced mechanical seal; the shaft seal chamber is equipped with a water cooling jacket, which can be connected to external cold water through a 1/4 pipe interface on the side of the pump to cool the shaft seal.

    　　Transmission mode: the pump is directly driven by the motor through a coupling. From the transmission direction, the pump rotates clockwise.

    　　Structural features:

    　　1) The IY type monoblock pump is designed according to the performance and dimension specifications established by the international standard ISO2858. The pump mainly consists of the pump body, pump cover, impeller, shaft, sealing components, and support components;
    　　2) The structure of the IY type monoblock centrifugal pump adopts a rear door form, that is, the division between the pump body and the cover is at the rear of the impeller; the body and cover form the pump working chamber; the impeller, shaft, and bearings are the pump rotor; the support and bearing components support the rotor. To balance the axial force of the pump, most impellers have sealing rings in front and behind, and balance holes in the impeller back plate. However, some pumps with low axial force do not require sealing rings or balance holes at the back of the impeller;
    　　3) The bearings use two radial ball bearings (the IR pump uses one radial ball bearing and two radial thrust ball bearings) installed in the support, which support the pump shaft and the radial and axial forces of the pump;
    　　4) The shaft seal uses packing seal or mechanical seal, and a sleeve is installed in the shaft seal to protect the shaft.


     

    Notice: For more performance parameters of the IY type horizontal single suction monoblock oil pump, please click →【Pump Selection】 to consult.

    Changsha Zhonglian Pump Industry Co., Ltd.

    Why Choose Us?

    Changsha Zhonglian Pump Industry Co., Ltd. was established in 1989, following the reform of the Changsha Water Pump Factory. It is a national high-tech comprehensive enterprise integrating design, research and development, manufacturing, and service. The company was listed on the Hunan Provincial Stock Exchange on December 31, 2019, with the abbreviated name "Zhonglian Pump Industry" and stock code: 600275HN. It is currently a key enterprise in China's centrifugal pump industry and one of the leading domestic manufacturers of multi-stage pumps, headquartered in Changsha, Hunan, a historical and cultural city in China.

    Changsha Zhonglian Pump Industry Co., Ltd.
    Changsha Zhonglian Pump Industry Co., Ltd.

    FAQ

    Q

    What products do you mainly produce?

    A

    Zoomlion Pump Industry manufactures various large industrial centrifugal pumps. The main products include: self-balancing multistage pumps, multistage centrifugal pumps, single-stage centrifugal pumps, split-case pumps, chemical pumps, submersible pumps, pipeline pumps, long-shaft pumps, condenser pumps, and more.

    Q

    Can you help me choose a model?

    A

    Of course! If the water pump model is not selected accurately, it can cause significant problems. After you take it back, it might be either too small to meet the usage requirements or too large, resulting in higher electricity and fuel costs, increasing the operating expenses.

    Q

    Why is the price quotation so slow?

    A

    Because centrifugal pumps are non-standard custom products with many models and a wide price range. Even for the same model, the price varies greatly depending on the materials and configurations used. Taking the most common pump accessory—the impeller—as an example, the price of a stainless steel impeller is several times that of a cast iron impeller. Therefore, we need to clearly confirm the relevant information to provide you with an accurate price. Normally, if you provide comprehensive information, we can quote within 5 minutes.

    Q

    What information should I provide when I need a quote?

    A

    Usually, if you want to get an accurate quote, it is recommended that you provide us with the following information: pump flow rate, head, on-site operating voltage, frequency, temperature of the conveyed liquid, pH value, solid particle content, on-site installation conditions (horizontal or vertical installation), and other related details. If you are not very familiar with these, it’s okay; our sales manager will assist you in determining them.

    Q

    Do you have centrifugal pumps in stock?

    A

    There are many models and configurations of centrifugal pumps. Except for a small number of commonly used standard models that are in stock, the vast majority of models and configurations are not stocked and are customized products. We need to first select the pump based on your site conditions such as flow rate, head, medium temperature, pH value, and installation conditions. After determining the pump model and configuration, we can then place an order with the workshop for production.

    Q

    What is your usual delivery time?

    A

    Models in stock can be shipped by the next day at the latest. Others are custom-made, and depending on the product size and specific project conditions, the delivery time is generally between 7-90 days. Please consult our sales manager for details: 0731-88632200 。

    Online Inquiry

    Attention: Please leave your contact information, our professional staff will contact you as soon as possible!

    Inquire Now